MIDEA 41" Bladeless Tower Fan & HEPA - Manual (Page 10)

INSTRUCTIONS
USER SERVICING INSTRUCTIONS
 Page 10 
Pre-Filter cleaning
1. Unplug the power cord.
2. Take out the filter.
3. Remove the dust with
vacuum cleaner.
4. Install the machine in
reverse order and plug
power supply.
1
3 4
2
1. Grasp plug and remove from the
receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse
access cover on top of attachment
plug towards blades.
3. Remove fuse carefully. Insert the tip of
your tool into fuse slot (close with the terminal),
then prize the fuse gradually and slowly, but not overexert. If you feel
tight, you can try it at several times and prize the fuse little by little. When
one side of the fuse has been prized, then you can get the fuse out
entirely.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment
plug.
6. Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug
is damaged.
Note:
• When you replace the fuse, please don’t operate suddenly or overexert,
or else the product will be damage or cause accident.
• When you feel it hard to be operated, please make sure you have got the
right way.