MIDEA 41" Bladeless Tower Fan & HEPA - Manual (Page 8)

 Page 8 
INSTRUCTIONS
Startup or shutdown
oscillating Startup/Standby
Switch the wind type
Set the timed shutdown/
reserved startup
Press “+, -” to set the wind
speed or timing time
Additional Features and Maintenance
Remote control button description
• Forced shut down
There is no operation during the running of the fan, after 15 hours of
continuous operation, the fan will be forced to shut down automatically.
• Intelligent memory
When the fan is turned off or powered off, it will run in the state before
turning off or power off when the power is powered on again (the timing
function is not memorized).
• Screen-off function
In case of no operation for 30 seconds during normal operation, the
indicator light on the body will be automatically off, but the fan will
continue to operate. Press the ON/OFF button to turn off the fan when
the screen is off, and press the other button to restore display.
Note:
• The remote control should be normally used on the front of the product
and 30 degrees of the deviation angle.
• The battery contains many heavy metals, acids and bases, etc., which
may threaten human's health; Waste batteries should be recycled
separately.