MIDEA MES30S4AST - Manual (Page 42)

CAUTION
PREPARING
FOR
FIRST
USE
COOKTOP
OPERATION
OVEN
OPERATION
CONTROL SETTINGS
TROUBLESHOOTING
CLEANING
AND
MAINTENANCE
42
NOTICE
TO PREVENT COSMETIC DAMAGE
Do not use scouring pads, abrasive cleaners, strong liquid chemicals, steel
wool, or oven cleaners, as these may damage the control panel finish.
For best results, it is recommended to clean the user interface and control
panel after each use. Control knobs can be removed for easier cleaning.
Ensure knobs are in the "OFF" position before removing. Pull straight back
with a firm pressure to remove knob from stem. Clean entire panel with a
lightly damp soft cloth using mild soap and water. Glass cleaner can be
used on oven control to remove streaks. Stainless steel cleaner can be used
on the exposed metal to remove streaks. Knobs should be washed by hand
in warm soapy water - do not wash in dishwasher. Wait until knobs are dry
before placing back on stem. Be sure to align profile in knob to stem shape
to ensure smooth fit and avoid damage to knob or control.
Oven Interior:
BURN HAZARD
Check oven after each use to determine if any spills or splattering occurred
that require cleaning. Wipe out oven interior with a lightly damp soft cloth
using mild soap and water to remove light spills. Follow the STEAM CLEAN
instructions under "Oven Operation" to remove moderate soiling. For
stubborn or heavy soiling, follow the SELF CLEAN instructions under
"Oven Operation."
Oven surfaces - especially oven bottom - may be hot. Use caution to
avoid contact with hot surfaces.
Hot surfaces may create hot steam in wet sponge or cloth while
cleaning. If steam is evident when wiping out oven, wait until oven
has cooled.
SAFETY
INSTRUCTIONS