Roland V-1200HD Multi-Format Video Switcher - Manual (Page 4)

Along with standard MIX, NAM and FAM
transitions are also built in. With NAM,
mixing proceeds from the picture's
brightest areas, and FAM transitions from
the picture on bus A to bus B with
additive compositing.
A dedicated V-1200HDR controller provides fast and accurate operation. Dual touch monitors provide quick and easy operation.
•
Examples of Wipe Patterns
Operation
These dual touch monitors let you
display different GUIs on the left and
right. Incoming video signals from the
HDMI connectors on the rear panel
can also be displayed.
Dual Touch Monitors
Monitor local audio inputs to the
console via HDMI.
Headphones Output
The value knob allows you to precisely adjust
parameter settings and enables fast
operation with "touch and turn" control
from parameters selected on the touch panel
Value Knob
This adjusts the volume level of
mixed audio.
Audio Master Volume
Four LAYOUT buttons are used to select
preset menus on the dual displays.
Layout Buttons
Designed in the style of a 1 M/E interface,
the control panel also accommodates
2 M/E operations.
M/E Transition Selection
The large T-bar provides manual precise
mixing and transition control.
T-bar
Transition buttons provide accurate, full
control of operations for the next take.
Transition Block
In addition to four composition inputs, the AUX bus
buttons also function as switches for two AUX buses
and two user presets.
Delegation Block
For future feature expansion
HDMI Output
Cross-points for primary inputs are
freely assignable to any location. The
name of the source appears at the
bottom of the display, reducing
operation errors.
Cross-point View
Select AUX outputs as well as inputs
for composition and user presets.
Functions can be accessed via the
delegation block to the right.
AUX Bus Switches
This broad range of cross-point
switches affords a commanding view
of 16 sources at one time.
This is also switchable to either
PGM/PST or flip/flop according to
operator preference.
16 Cross-Points
In addition to an AC adapter, the unit
can be powered by 12V battery.
Connecting both at the same time
provides redundant power.
Redundant Power
All the functionality required for operation of a high-end switcher, in an efficient compact size.
FAM and NAM transitions Ordinary MIX transition
Video A Video A Video B Video B
• V-1200HD menus shown on the left and
right displays
• The V-1200HD's multi-view output shown on
the right display
Connect the main V-1200HD unit's multi-view
outputs to the V-1200HDR's HDMI inputs to display
the multiview content on the V-1200HDR's built-in
screens.
HDMI Input
* HDCP support
An Ethernet cable connects the console and the main-unit
processors. Using an Ethernet hub lets you connect up to four
control panels or with the V-1200HDR RCS
(remote control software) to the V-1200HD at the same time.
LAN Port
* Use a Cat 5e or higher cable for connection.
Wireless
LAN device
V-1200HD V-1200HDR
Ethernet
HUB
Setup Example
The Positioner is for the three X, Y, and Z
parameters when adjusting position and
size for PinP and controlling remote
cameras.
Positioner
V-1200HD