Roland KC-600 Stereo Mixing 4-Channel Keyboard Amplifier - Manual (Page 4)

4
Panel Descriptions (KC-400/KC-600)
Top Panel
1 [CH1]–[CH4] knobs
Adjust the volume of the devices connected to CH1–CH4.
[OUTPUT SEL] knob
This knob lets you specify the output destination(s) of the
signal that is input to CH4; you can choose from various
combinations of the headphones, speaker, and line
out. Choose from the following as appropriate for your
situation.
Setting Explanation
Output only to headphones. The signal is
not output to the internal speaker or to
line out.
Output to headphones and the internal
speaker. The signal is not output to line
out.
Output to all destinations: headphones,
the internal speaker, and line out.
2 [AUX IN] knob
Adjusts the volume of the instrument that is connected to the
AUX IN jacks.
3 [PHONES] knob
Adjusts the volume level of headphones output.
4 EQUALIZER
[LOW] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[HIGH] knob
Adjusts the sound level of the high-frequency range.
* The EQUALIZER knobs affect only the speaker output and the
signal that is output from the SUB OUT jack.
5 [SHAPE] button
Switching on this button boosts the high-frequency and low-
frequency ranges. This is a convenient way to compensate the
tonal character or increase the impact when you’re playing at a
low volume.
* This applies only to the output of the internal speaker.
6 [MASTER] knob
Adjusts the overall volume.
This knob also simultaneously adjusts the volume that is output
from the SUB OUT jack.
* The [MASTER] knob does not adjust the signal that is output
from the LINE OUT jack.
7 [POWER] switch
Turns the power on/off. When the power is on, the indicator at the
left of this switch is lit.
3 5 6 2 4 7 1
Top Panel
14
9 8
10 12 13 11
Rear Panel
* The illustration shows the KC-600. The KC-400 does not have LINE OUT: BALANCED jacks.