Roland MC-101 Portable Groovebox - Manual (Page 21)

USING THE UNIT SAFELY
21
WARNING
Turn off the unit if an abnormality or malfunction
occurs
In the following cases,
immediately turn off the power
and contact your dealer, a
Roland service center, or an
official Roland dealer for service.
• If smoke or unusual odor occurs; or
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or
otherwise has become wet); or
• The unit does not appear to operate normally
or exhibits a marked change in performance.
For a list of Roland service centers and
official Roland dealers, refer to the Roland
website.
Be cautious to protect children from injury
Always make sure that an adult is
on hand to provide supervision
and guidance when using the
unit in places where children are
present, or when a child will be
using the unit.
Do not drop or subject to strong impact
Otherwise, you risk causing
damage or malfunction.
WARNING
Handle batteries carefully
If used improperly, you risk
the dangers of fluid leakage,
overheating, combustion,
explosion, etc. Carefully observe
the following:
• Do not heat, disassemble, or toss
them into a fire or water.
• Do not expose them to sunlight,
flame, or any other source of
extreme heat.
• Do not attempt to charge a dry
cell battery.
• When using a rechargeable
battery and a charger, make sure
to use only the combination of
rechargeable battery and charger
that has been specified by the
battery manufacturer. Also, be
sure to read all of the precautions
that were supplied with the
rechargeable battery and charger, and abide
by them when using the battery/charger.
CAUTION
Route all power cords and cables in such a way as to
prevent them from getting entangled
Injury could result if someone
were to trip on a cable and cause
the unit to fall or topple.
Avoid climbing on top of the unit, or placing heavy
objects on it
Otherwise, you risk injury as the
result of the unit toppling over
or dropping down.
Disconnect all cords/cables before moving the unit
Damage or malfunction may
result if you fail to disconnect all
cables before moving the unit.