Self-timer, Help guide – Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) User Manual

Page 130

Advertising
background image

Help Guide

Interchangeable Lens Digital Camera

ILCE-7C

α7C

Self-timer

Shoots an image using the self-timer after a designated number of seconds have elapsed since the shutter button was
pressed. Use the 5-second/10-second self-timer when you are going to be in the picture, and use the 2-second self-timer
to reduce camera-shake caused by pressing the shutter button.

Menu item details

The mode determines the number of seconds until a picture is taken after the shutter button is pressed.

Self-timer: 10 Sec

Self-timer: 5 Sec

Self-timer: 2 Sec

Hint

Press the shutter button again or press

/

(Drive Mode) on the control wheel to stop the count of the self-timer.

Press

/

(Drive Mode) on the control wheel and select

(Single Shooting) to cancel the self-timer.

Set [Audio signals] to [Off] to turn off the beeping sound during the self-timer countdown.

To use the self-timer in bracket mode, select bracket mode under drive mode, then select MENU →

(Camera Settings1) →

[Bracket Settings] → [Selftimer during Bracket].

Related Topic

Audio signals

5-021-699-11(1) Copyright 2020 Sony Corporation

Press

/

(Drive Mode) of the control wheel → [Self-timer].

You can also set the drive mode by selecting MENU→

(Camera Settings1) → [Drive Mode].

1

Select the desired mode using the right/left side of the control wheel.

2

Adjust the focus and shoot the image.

The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated number of seconds have
elapsed.

3

130

Advertising