Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) User Manual
Page 231
The sound of the lens and the product in operation may be recorded during movie recording.
You can turn the sound off by selecting MENU →
(Camera Settings2) → [Audio Recording] → [Off].
When shooting, the sound of the shoulder strap hooks (triangular hook) could be recorded, depending on the situation used.
To prevent the operating sound of the zoom ring from being recorded during movie recording when a power zoom lens is used,
we recommend recording movies using the zoom lever. When you move the zoom lever, place your finger lightly on the lever and
operate it without flicking.
An icon indicating that data is being written is displayed after shooting. Do not remove the memory card while the icon is
displayed.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
If
(Overheating warning icon) appears, the temperature of the camera has risen. Turn the power off and cool the camera and
wait until the camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When movie recording is finished, you
can record another movie by pressing the MOVIE button again. Recording may stop to protect the product, depending on the
temperature of the product or the battery.
When the mode dial is set to
(Movie) or
(S&Q Motion) or when shooting movies, you cannot select [Tracking] for
[Focus Area].
In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set automatically and cannot be
changed. For that reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not be
recorded smoothly. By changing the exposure mode and adjusting the aperture value and the shutter speed, the motion of the
subject can be recorded smoothly.
In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set
temporarily.
Rich-tone Mono.
The Face Detection function / Eye Detection function is not available in the following situations.
[
File Format] is set to [XAVC S 4K], [
Record Setting] is set to [30p 100M]/[25p 100M] or [30p 60M]/[25p 60M], and [
4K Output Select] is set to [Memory Card+HDMI]
If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in
the image may be recorded as a black area.
If the display mode of the monitor is set to [For viewfinder], the display mode will switch to [Display All Info.] when movie shooting
starts.
Related Topic
Recordable movie times
Assigning frequently used functions to buttons (Custom Key)
5-021-699-11(1) Copyright 2020 Sony Corporation
231