Sony BDP-S1700 Blu-ray Disc Player - Manual (Page 56)

56 GB
Output (Analog)
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed)
4)
Weighted network
5) Input level
FM tuner section
Tuning range
USA and Canadian models:
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
HDMI Video
Resolution
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz, 30 Hz, 24 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
Support
HDCP 2.2, HDR (HDR10, Hybrid Log-
Gamma, Dolby Vision), 3D, Deep Color
(Deep Colour), ITU-R BT.2020, eARC/ARC
Power supply section
POWER SUPPLY port
DC 5 V 1 A (Max.)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.6 (Audio Video Remote Control
Profile)
Supported Codecs
3)
SBC
4)
, AAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
44.1 kHz)
Frequency band and maximum output power
(European models only)
BLUETOOTH
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, cordless phone, reception
sensitivity, antenna’s performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
General
Power requirements
Power consumption
240 W
Standby mode: 0.3 W
(When “CTRL.HDMI” is set to “CTRL
OFF”, “STBY.THRU” is set to “OFF”, and
“BT STBY” is set to “STBY OFF”.)
BLUETOOTH Standby mode (all wireless
network ports are activated): 0.5 W
(When “BT STBY” is set to “STBY ON”,
“CTRL.HDMI” is set to “CTRL OFF”, and
“STBY.THRU” is set to “OFF”.)
Dimensions (width/height/depth) (Approx.)
430 mm × 133 mm × 297 mm (17 in ×
5 1/4 in × 11 3/4 in) including projecting
parts and controls
Frequency
band Maximum output
power
2,400 MHz –
2,483.5 MHz
≤ 6.0 dBm
Area Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Oceania 230 V AC, 50 Hz
Europe 230 V AC, 50/60 Hz