Sony VENICE 2 Digital Motion Picture Camera (8K) User Manual
Page 10
DSC-RX10M4
4-725-744-11(1)
GB
10
C:\Users\gotanda\Desktop\4725744111DSCRX10M4UC2\01GB-DSCRX10M4UC2\020PRE.indd
DTP data saved: 2017/07/19 10:29
PDF file created: 2017/07/28 13:21
Image sensor position
mark
The image sensor is the
sensor that converts light into
an electric signal. The
mark shows the location of
the image sensor. When you
measure the exact distance
between the camera and the
subject, refer to the position of
the horizontal line.
If the subject is closer than the
minimum shooting distance of
the lens, the focus cannot be
confirmed. Make sure you put
enough distance between the
subject and the camera.
Speaker
(Microphone) jack
When an external microphone
is connected, the built-in
microphone turns off
automatically. When the
external microphone is a
plugin-power type, the power
of the microphone is supplied
by the camera.
(
Headphones) jack
Multi/Micro USB Terminal
• This terminal supports Micro
USB-compatible devices.
• For details on compatible
accessories for the Multi/
Micro USB Terminal, visit
the Sony website, or consult
your Sony dealer or local
authorized Sony service
facility.
HDMI micro jack
Charge lamp
Monitor (For touch operation:
Touch panel/Touch pad)
You can adjust the monitor to
an easily viewable angle and
shoot from any position.
You may not be able to adjust
the monitor angle depending
on the type of a tripod you
use. In such a case, release the
tripod screw once to adjust the
monitor angle.