Sony MDR-ZX110NC Noise-Canceling On-Ear Headphones - Manual (Page 10)

D:\_SONY TV\SY21_B2B_UCF_RG_131\01US\5027091131_US.fm master page: Left
FW-100BZ40J / 75BZ30J / 65BZ30J / 55BZ30J1 / 55BZ30J / 50BZ35J / 50BZ30J / 43BZ35J / 43BZ30J / 32BZ30J
5-027-091- 13 (1)
10 US
 USB 1, USB 2
• Connecting a large USB device may
interfere with other connected
devices beside it.
 
(Headphone)
• Supports 3-pole stereo mini jack only.
• You cannot output sound from both
the headphone and the LCD Display
speakers at the same time.
 
/

AV IN
• For a composite connection, use an
Analog Extension Cable (not
supplied).
•
 HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
• If the device has a DVI jack, connect it
to HDMI IN 4 through a DVI - HDMI
adapter interface (not supplied), and
connect the device’s audio out jack to
HDMI 4 AUDIO IN.
•
• HDMI IN 3 eARC/ARC (Enhanced
Audio Return Channel/Audio
Return Channel)
Connect your audio system to the
HDMI IN 3 to route LCD Display audio
to your audio system. An audio
system that supports HDMI eARC/
ARC can send video to the LCD
Display, and receive audio from the
LCD Display via the same HDMI cable.
If your audio system does not support
HDMI eARC/ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
• Use the HDMI cable with Ethernet to
connect audio system with eARC.
 REMOTE RS-232C
• Terminal for serial communication.
For details, see “Control functions”.

HDMI 4 AUDIO IN
• If the device has a DVI jack, connect it
to HDMI IN 4 through a DVI - HDMI
adapter interface (not supplied), and
connect the device's audio out jack to
HDMI 4 AUDIO IN.
3 2 1 4
3.5 mm
1: L
2: Video
3: Ground
4: R
<
<
12 mm
21 mm
RX TX GND