Sony E 30mm f/3.5 Macro Lens - Manual (Page 42)

GB 42
Indicators
Indicators
You can check the projector status or abnormality by checking the lighting/flashing status of the ON/
STANDBY indicator and WARNING indicator on the front. If the indicators flash in red, address the problem
in accordance with “Warning indication and remedies” (page 43).
Status indication
Indicator status Operating status Description
Standby The power is supplied to the projector and the projector is in a
standby mode according to the setting.
Warm-up The projector is warming up after it is turned on.
Power on The projector is ready for projection.
Other standby
status The projector is in With No Input (Light Cutoff).
Updating software The projector software is being updated.
WARNING
indicator ON/STANDBY
indicator
(Lights in red) (Off)
(Flashes in green) (Off)
(Lights in green) (Off)
(Lights in orange) (Off)
(Flashes in orange) (Off)