Enterasys Networks 6000 - Manual (Page 175)

Managing Ethernet MicroLAN Modules
5-12 Repeater Statistics
Configuring the Performance Graphs
To configure the Performance Graphs:
1. Click on the Percent Load button; select the desired Load mode from the
menu.
2. Click on the Frames button; select the desired Frames mode from the menu.
3. Click on the Total Errors button; select the desired Errors mode from the
menu.
Once you have selected a new mode, it will appear in its respective button, and the
Performance Graph and statistics will refresh and begin to measure using the new mode.
To stop monitoring and exit the window, click Cancel.
The Detail Button
The Detail button allows you to view traffic processed by the repeater channel, board, or
port according to general frame status (good, errors, or collisions); it also allows you to
view errors by type.
When you click the Detail button, a separate window appears ( Figure 5-5 ) that displays
pie charts and statistics for both frame status and error type.
Figure 5-5. Detail Breakdown Window