Enterasys Networks 6000 User Manual
Page 31
The Device View
2-12
Viewing Device Information
The FDDI Menu
If your SmartSwitch 6000 or Matrix E7 has an installed HSIM-F6, the FDDI menu will
appear on the Device View menu bar, with the following options:
•
Configuration
•
Connection Policy
•
Station List
•
Performance
•
Frame Translation
Refer to Chapter 6,
, for information on these menu selections.
The Utilities Menu
The Utilities menu provides the following selections
•
MIB Tools -- provides direct access to the SmartSwitch 6000 or Matrix E7 module’s
MIB information; refer to the Element Manager Tools Guide for more information.
•
Launch WebView opens up the Web View for the device, if the device supports it.
•
RMON -- a remote monitoring feature that is supported on a per-port basis when at
least one Ethernet or Fast Ethernet module is installed in the chassis; refer to the
RMON User’s Guide for more information.
These selections are also available from the Tools menu at the top of the primary NetSight
Element Manager window.
The Help Menu
The Help Menu has the following three selections:
•
MIBs Supported brings up the Chassis Manager window, described later in this
chapter.
•
Chassis Manager Help brings up a help window with information specifically related
to using the Chassis Manager and Device View windows.
•
About Chassis Manager brings up a version window for the Chassis Manager
application in use.
The Module Menu
The Module menu for the SmartSwitch 6000 or Matrix E7 module provides mostly
bridging-related selections, many of which are also available from the Bridge Status
window:
•
Module Information opens a Module Information window that provides firmware
and manufacturing information which may be useful when troubleshooting any
problems that you are having with the module. For more information, refer to
•
Module Type brings up a window containing a description of the selected module; see
, on