Enterasys Networks 6000 - Manual (Page 181)

Managing Ethernet MicroLAN Modules
5-18 Alarm Limits
Accessing the Alarm Limits Windows
To open the repeater-level Alarm Limits window from the Device View:
1. Click on Repeater on the Device View menu bar; a menu listing the available
repeater channels will appear.
2. Drag down to select the appropriate repeater channel (A - H), then right to
reveal the Repeater menu.
3. Select Alarm Limits. The Repeater Alarm Limits window, Figure 5-6 , will
appear.
Figure 5-6. The Repeater Alarm Limits Window
TIP
Although you can access the Alarm Limits window at both the repeater and board levels,
note that setting alarms at those two levels will have the same effect, as each Ethernet
MicroLAN module “board” is equivalent to a repeater channel.