Sony DWT-B30 Digital Wireless Bodypack Transmitter (UC7: 470 to 616 MHz) - Manual (Page 16)

16
the unit on in a state where signals are not transmitted
before changing the setting.
• To start signal transmission with the factory settings,
turn off the unit and then turn it on again.
Software Version Display
(VERSION)
Display the version of the unit’s software.
Attaching the Belt Clip
Attaching the supplied belt clip allows you to attach the
unit to the speaker.
Removing the belt clip
Insert the belt clip into a
hole on one side of the
unit, and then insert it into
the hole on the other side.
Gently pull the belt clip away from the unit using
a pen, for example, and remove it.