Vizio V-Series 43" 4K HDR Smart LED TV - Manual (Page 17)

17
To adjust the White Balance Tuner settings:
Menu > Picture > Advanced Picture > Color Calibration > White
Balance Tuner
1. Use the Navigation buttons on the remote to highlight the Gain and Color values
you wish to adjust. Press the OK button and use the Left/Right Navigation
buttons to adjust the value. When you are finished, press the OK button to save
the setting.
To reset the 20 point white balance, offset, and gain to the defaults:
Menu > Picture > Advanced Picture > Color Calibration > Reset
Color Temperature
To adjust the color management system settings:
1. Use the Navigation buttons on the remote to highlight the Hue, Saturation,
Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are
finished press the OK button to save the setting.
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 20
point white balance, turn color channels off for testing, and display SMPTE, flat,
ramp, and uniformity analyzer test patterns .
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration > Color
Tuner
To turn color channels off and on:
1. Use the Navigation buttons on the remote to highlight Red , Green , or Blue .
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
WARNING: The Color Tuner, White Balance, and test patterns
allow technicians to manually calibrate the TV. Calibration requires
specialized training, an input with precisely set colors, and a
specialized light meter.
TIP: Any changes made affect the color temperature setting.
Select the preferred color temperature setting first. See Adjusting
the Color Temperature on page 15.
To show or hide the SMPTE Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration >
Calibration Test > SMPTE Test Pattern
1. Use the Navigation buttons on the remote to highlight Off. Use the Left/Right
Navigation buttons to select On to show the SMPTE Pattern.
—or—
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to
select Off.
SMPTE Test Pattern
Off
White Balance Tuner
Red Green Blue
IRE% 5 0 0 0
Offset 0 0 0
Gain 0 0 0