Eagle Electronics EVR-100 - Manual (Page 15)

EAGLE EVR-100 Operation Instructions 15
Scanning Features
Your radio is equipped with 2 types of scan options: All Scan, 3CH Scan (Favourite Channel
Scan). If there are no channels added as favourite channels, the default is All Scan. This function
automatically searches for transmissions on the channel being scanned. If a signal is received, the
scan stops on the receiving channel as long as it is present and the SCAN indicator flashes. If the
signal is lost for 3 seconds, the radio resumes scanning.
All Scan
Press and hold the SCAN key for 3 seconds to activate the All Scan function. The SCAN and ALL
indicator appears on the LCD during All Scan. In All Scan mode, all channels in the channel set are
scanned in sequence except the channel set as SKIP channel using SKIP function. After the last
channel number has been scanned, the cycle repeats. Press SCAN key again to terminate the
SCAN mode.
To Skip a channel in ALL scan
Press SKIP to temporarily remove (SKIP) the channel from ALL SCAN. The channel will be
marked with an . Press again to cancel the channel SKIP.
3CH Scan (Favourite Channels Scan)
Press 3CH key when there is at least one favourite channel saved in memory.
Press and hold the SCAN key for 3 seconds to start 3CH Scan , the SCAN indicators appear on the
LCD. Only the favourite channels and priority channels (CH16) are scanned in sequence.
Your radio can store up to three favourite channels. Quick press of the 3CH key will access the
stored favourite channels directly (shortcut).
To Add Channels to 3CH List
During normal operation mode, use the + CH - keys to select the desired channel for
programming.
Press and hold the 3CH key for 3 seconds. The "C1" icon appears to indicate the current
channel has been saved in first favourite channel. Repeat for the second and third favourite
channels as C2 and C3 respectively.
To Delete Channels from 3CH List
Select the favourite channel to be deleted using the + CH - keys, or repeated quick press of
the 3CH key. Press and hold the 3CH key until the “Cn” icon disappears.
Monitor Modes (Dual Watch)
Quick press the SCAN key to activate the Dual Watch mode. The "DW" indicator appears on the
LCD. Dual Watch monitors the current working channel and Channel 16 in sequence. WX ALT is
also scanned in this mode if set. The watch is halted when activity is detected on a monitored
channel. Press SCAN key or PTT to terminate Dual Watch and return to the previous working
channel.