Eagle Electronics EVR-100 - Manual (Page 17)

EAGLE EVR-100 Operation Instructions 17
Appendix A - Technical Specifications
GENERAL
Power Supply:
13.8V DC.
Current drain:
Transmit
1.5 A at 7 W Tx / 0.6A at 1W Tx
Receive Less than 250mA in standby
Useable channels: International, USA, Canada, Weather (country specific)
Mode: 16K0G3E (FM)
PHYSICAL
LCD display (viewing):
41(H) x 53(W) mm
Backlight control: Yes (On/Off )
Antenna connector: SO-239 (50 ohm)
Temperature Range: -17ºC to +50ºC
Waterproof: JIS-7
Dimensions: 161(W) x 75(H) x 147(D) mm - without bracket
Weight: 0.87kg with microphone
Frequency stability: +/- 10ppm
Frequency control: PLL
GPS/NMEA input: No
Comm port: n/a
DSC: No
FEATURES
Flush Mount kit:
Yes
Local/Distant control: No
Position polling: No
Group Call: No
Channel Naming: No
Dual watch, Favourite
channel scan, All scan:
Yes
TRANSMITTER
Frequency:
156.025 - 157.425MHz
Output power: 7 W / 1 W selectable
Transmitter protection: Open / short circuit of antenna
Max Freq deviation: +/- 5kHz
Spurious & harmonics: better than 2.5µ W
Modulation distortion: Less than 4%@ 1kHz for a +/-3kHz deviation
RECEIVER
Frequency:
156.025 - 163.275 MHz
12dB SINAD sensitivity: 0.25uV
20db SINAD sensitivity: 0.35uV
Adjacent CH selectivity: more than 65db
Spurious response: more than 65 db
Intermodulation Rejection ratio: more than 65 db
Residual Noise level: more than -40 db unsquelched
Audio output power: 2 W (with 8 ohm at 10% distortion)
4 W with 4 ohm external speaker
Compass safe distance: 0.5 m (1.5’)
Specifications are subject to change without notice.