GIGABYTE G34WQC 34" 21:9 VA Curved Gaming Monitor - Manual (Page 19)

-19-
LCD Monitor User's Manual
Installing a Wall-Mount Bracket (Optional)
Use only the 100 x 100 mm wall mount kit recommended by the manu-
facturer.
1. Place the monitor on the lower EPS foam, with the screen facing
down.
2. Push the locking clips inward to detach the stand from the monitor.
3. Attach the mounting bracket to the mounting holes at the rear of
the monitor. Then use the screws to secure the bracket in place.
Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit.
The monitor head may be installed on wall, rotary brackets or other brackets.
This monitor supports 100 mm mounting holes that comply with VESA industrial
standard. To install any third-party solution to the monitor, four φ4 mm screws
with pitch of 0.7 mm and length of 10 mm are required. If any longer screw is
used, the monitor may be damaged. Check if the bracket provided by the man-
ufacturer complies with VESA standard and is able to support the monitor body.
Please use the power cable and video cable attached to the monitor, in order to
ensure the optimal performance.
100 mm
100 mm