Connecting the cables – HP OMEN 32q 31.5" QHD HDR 165 Hz Gaming Monitor User Manual
Page 15
2.
Remove the hinge from the VESA recess located on the rear of the monitor head.
3.
To attach the monitor head to a swing arm or other mounting device, align the mounting plate on
the swing arm with the screw holes on the back of the monitor head (1).
IMPORTANT:
If these instructions do not apply to your device, then follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
4.
Insert four mounting screws through the holes on the mounting device and into the VESA screw
holes on the back of the monitor head (2) and secure the screws (3).
Connecting the cables
In addition to details about how to connect a cable, this section contains information about how your
monitor functions when you connect certain cables.
NOTE:
The monitor supports HDMI or DisplayPort inputs. The video mode is determined by the video
cable used. The monitor automatically determines which inputs have valid video signals. You can select
the inputs through the OSD menu. The monitor ships with select cables. Not all cables shown in this
section are included with the monitor.
1.
Place the monitor in a convenient, well-ventilated location near the computer.
10
Chapter 1 Getting started