Extron electronic VLM 2000 - Manual (Page 17)

2-7 VoiceLift ™ Microphone • Operation and Features
PRELIMINAR
Y
When the microphone is powered off:
LED Color Indication
Red – steady Battery charging
Green – steady Battery fully charged
Red and green – flashing, alternating Alkaline or damaged battery detected
e
Microphone acoustic port — The microphone receives the audio signals via
this port. Do not block this port while the microphone is in use.
f
Charging contacts — When charging the microphone using the VLC 102
charging station, insert the end of the microphone containing these contacts
into one of the charging station’s slots.
Charging the microphone
The pendant microphone can be charged by the following methods:
• In the VLC 102 charging station (provided with the VLM 2000 kit)
• Directly from the wall charger (provided with the VLM 1000 and VLM 2000 kits)
Using the VLC 102 charging station
The VLC 102 charging station provides a convenient way to charge the VLP 102
microphone’s battery overnight or between uses. The charging station can charge
two microphones simultaneously, and the microphones can start/finish charging at
different times.
The microphone battery requires up to 6 hours to charge fully, in order to provide a
full day’s use. It can be left to charge for extended periods, such as winter or spring
breaks.
C Do not charge alkaline or NiCd batteries.
Follow these steps to charge the microphone using the charging station:
1. Turn off the microphone by sliding the PWR switch to Off/Mute/Chg.
N The microphone should be turned off before charging. However, if it is
inadvertently left on, the microphone continues to charge, but at a slower rate. If
the microphone is on when placed in the charger, its PWR LED lights red.