Preliminar y, Special application, cont’d – Extron electronic VLM 2000 User Manual
Page 42
Special Application, cont’d
VoiceLift Microphone • Special Application
4-4
PRELIMINAR
Y
4.
Using Global Configurator on your computer, configure the MLC’s Digital
I/O port for digital input with pull-up.
Global Configurator screen for configuring the MLC’s Digital I/O port
5.
Use Global Configurator to configure a monitoring device to send an e-mail
when the MLC’s Digital I/O port closes.
(Refer to the Global Configurator help file for procedures to configure the
MLC’s Digital I/O port and the monitor using Global Configurator.)
6.
Test the instant alert notification as follows:
a.
Make sure that the MLC 104 IP Plus is connected to the network.
b.
Make sure that channel A or B has been selected for the microphone.
c.
Press and hold both sections of the Volume button on the microphone
simultaneously for 2 seconds. The LED in the receiver dome blinks
alternating amber and green.
Press and hold both
sections of the
Volume button
simultaneously.
d.
Check for the arrival of the e-mail notification.