Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 17)

17
Setting Channels and Groups
The Impact Digital Monolight has an integrated 2.4 GHz multichannel radio
receiver. The three-light kit (VC-500WL3KN-II) includes a wireless radio
transmitter for remote triggering.
See page 20 for instructions on using the remote with your monolights.
To access the channel and groups pages, press and hold the Slave button for 4
seconds until the preflash page appears. Press the slave button repeatedly to
cycle through preflash, channel, and groups pages.
Once the channel and group are set, press and hold the Slave button for 4
seconds to return to the main screen.
Setting a Channel
Set your devices to the same channel to trigger them
all at the same time. This also aids in avoiding radio
interference from other devices in the area.
• Press the Slave button repeatedly to select the
channel or group screen.
• Use the or buttons to select a channel.
• Make sure the remote is set to the same channel. See Remote Instructions
on page 20.