Nikon AF-S NIKKOR 16-35mm f/4G ED VR Lens - Manual (Page 21)

Jp
En
De
Fr
Es
Se
Ru
Nl
It
Cz
Sk
Ck
Ch
Kr
21
• If this lens is used with cameras that do not
have the vibration reduction function
(P.17), set the vibration reduction ON/OFF
switch to
OFF . With the Pronea 600i/6i
camera, in particular, battery power may
become quickly depleted if this switch is
left
ON .
„ Focusing, zooming, and depth of
field
Before focusing, rotate the zoom ring to
adjust the focal length until the desired
composition is framed. If your camera has a
depth-of-field preview (stopdown) button or
lever, depth of field can be previewed
through the camera viewfinder.
• This lens is equipped with the Internal
Focusing (IF) system. As the shooting
distance decreases, the focal length also
decreases.
• The distance scale does not indicate the
precise distance between the subject and
the camera. Values are approximate and
should be used only as a general guide.
When shooting distant landscapes, depth
of field may influence operation and the
subject may appear in focus at a position
that is closer than infinity.
• For more information, see p. 156.
„ Setting the aperture
Use the camera to adjust the aperture
setting.
„ The built-in flash and vignetting
• The built-in flash cannot be used over
distances of less than 0.6 m (2.0 ft).
• To prevent vignetting, do not use the lens
hood.
• For the latest information on vignetting
with this lens, see the camera manual.
• Vignetting is the darkening of the corners
around the image that occurs when the
light emitted by the flash is obstructed by
the lens barrel.