Audio-Technica ATH-SQ1TW True Wireless In-Ear Headphones (Popcorn White) - Manual (Page 28)

27
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners, or other solvents for cleaning purposes.
Wipe any dirt off the headphones and charging case with a dry cloth. The headphones may not operate correctly if
the headphones are wet. Wipe the headphones with a dry cloth, shake them multiple times to remove any excess
water, and allow the headphones to dry thoroughly before use.
Immediately wipe off sweat or any other moisture from the charging case battery jack, the headphone charging
terminals, and the touch sensors. Failure to do so may result in a malfunction due to corrosion.
Natural oils from the skin are particularly likely to build up on the eartip attachment parts (see figure). If these areas
are not cleaned, the eartips can become detached. Clean them regularly. Do not touch the areas where sound is
produced as they are delicate. Doing so may result in malfunction.
If any moisture remains in the holes near the microphones (see figure), place the headphones on a dry cloth and
shake several times to remove any moisture, and then allow the headphones to dry thoroughly before use.
Wipe away any perspiration or dirt from the USB charging cable with a dry cloth immediately after use. Failure to
clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
If the USB terminal of the charging cable is dirty, wipe it off with a dry cloth.
Clean the eartips by removing them from the headphones and manually cleaning them with a diluted mild detergent.
After cleaning, dry before using again.
1 Eartip attachment part
2 Sound reproduction part
3 Microphone
If the product will not be used for an extended period of time, store it in a well-ventilated place free from high
temperatures and humidity.