Kandao QooCam 8K Enterprise 360 Camera - Manual (Page 12)

68 69
Camera Specification
Lens
Sensor
Video resolution
Photo resolution
Video Format
Photo Format
Audio Format
Video Encode
Max.Bitrate (video output)
IMU
Touchscreen
Basic Specification
F2.0 ， FOV ： 200°
1/1.7”CMOS,20MP
7680*3840@30fps 8/10bit ，
3840*1920@30fps/60fps/120fps 8/10bit
7680*3840 ， 12bitRAW ，
SuperHDR （ 16bit output ）
MP4
JPG 、 DNG
PCM
H.264 ， H.265
200Mbps
6-axis IMU
2.4 inch colorful touch screen
LED灯状态
Photo
Video
Live streaming
EV
Exposure
mode
White
balance
Photo/Video Recording
Still image, Timed photos, SuperHDR, Time lapse photo
Video, Time lapse video, SuperVlog, Slow motion, Sports mode
4K 360° Live
-2EV ~ +2EV
EV (auto): -2EV ~ +2EV
Photo: 1/6400s-60s
SuperHDR: 1/6400s-1s
30fps
： 1/6400s-1/30s
60fps ： 1/6400s-1/60s
120fps ： 1/6400s-1/120s
ISO: 100-6400
Sports Mode:
There are three choices to control the maximum shutter
time:Off, Mode 1, Mode 2
For 50Hz, Mode 1 is 1/50s, Mode 2 is 1/100s
For 60Hz, Mode 1 is 1/60s, Mode 2 is 1/120s
Mode 1 is suitable for indoor moving shooting while Mode 2
for low light moving shooting
Motion EV: -2EV ~ +2EV
AWB, Fluorescent, Incandescent, Cloudy, Daylight
Scan and get QooCam APP, QooCam Studio,
firmware update guide
https://www.kandaovr.com/download/
Scan and get tutorials
https://www.kandaovr.com/user-guide/
For More information
Camera Firmware Update
Using QooCam APP
There will be a updating reminds
in App when cellphone is Wi-Fi or
wired connected to QooCam 8K
and find a FW updates.Please
follow the steps to update.
Note:
• Ensure the battery level of
QooCam 8K is over 50% when
upgrading
• Do not operate the camera
during the upgrading process.
Screen status
The inter face turns black and
there’ s a progress bar to show
updating status. QooCam 8K will
automatically turn off after FW
upgrading is completed.
Status LEDs
The blue light flashes quickly during
the upgrade process, and the
camera will automatically turn off
after the upgrade is completed.
EN EN