Essential instructions, Oxybalance, Oxybalance oxygen display and averaging system – Emerson OXYBALANCE IM-106-4050 User Manual

Page 5

Advertising
background image

Instruction Manual

IM-106-4050 Original Issue
March 2006

OxyBalance Oxygen Display

and Averaging System

http://www.processanalytic.com

OxyBalance

Oxygen Display and Averaging System

READ THIS PAGE BEFORE PROCEEDING!

ESSENTIAL
INSTRUCTIONS

Emerson process Management designs, manufactures and tests its products
to meet many national and international standards. Because these
instruments are sophisticated technical products, you MUST properly
install, use, and maintain them
to ensure they continue to operate within
their normal specifications. The following instructions MUST be adhered to
and integrated into your safety program when installing, using, and
maintaining Rosemount Analytical products. Failure to follow the proper
instructions may cause any one of the following situations to occur: Loss of
life; personal injury; property damage; damage to this instrument; and
warranty invalidation.

Read all instructions prior to installing, operating, and servicing the

product.

• If you do not understand any of the instructions, contact your

Rosemount Analytical representative for clarification.

Follow all warnings, cautions, and instructions marked on and

supplied with the product.

Inform and educate your personnel in the proper installation,

operation, and maintenance of the product.

Install your equipment as specified in the Installation Instructions

of the appropriate Instruction Manual and per applicable local and
national codes.
Connect all products to the proper electrical and
pressure sources.

• To ensure proper performance, use qualified personnel to install,

operate, update, program, and maintain the product.

• When replacement parts are required, ensure that qualified people use

replacement parts specified by Rosemount Analytical. Unauthorized
parts and procedures can affect the product's performance, place the
safe operation of your process at risk, and VOID YOUR WARRANTY.
Look-alike substitutions may result in fire, electrical hazards, or
improper operation.

Ensure that all equipment doors are closed and protective covers

are in place, except when maintenance is being performed by
qualified persons, to prevent electrical shock and personal injury
.

The information contained in this document is subject to change without
notice.

Advertising