E&J TRAVELER 3F02-INS-LAB-REVB10 - Manual (Page 13)

3F02-INS-LAB-RevB10, March 2010 • Traveler L4 User Manual 13
5 ADJUSTMENTS
The Traveler L4 offers several adjustments to make it easier and more
comfortable to drive. Section 7, MAINTENANCE, offers preventive main-
tenance suggestions for keeping your wheelchair in excellent condition;
ensure that all components are in excellent condition before adjusting.
The following are recommended methods; after a few adjustments, you
may develop your own. Always consult your Graham-Field dealer for as-
sistance.
The person performing adjustments on the Traveler L4 has the responsi-
bility of making certain that the user can safely operate the wheelchair
with the adjustments selected. This person must evaluate the user's abil-
ity, weight, physical condition, the environment in which the wheelchair
will be used, and the terrain over which the wheelchair will travel.
All adjustments and their page locations are referenced in the index at
the end of this manual. Specific tools needed to perform each adjustment
are identified in adjustment directions. A complete list of tools needed to
perform all adjustments in this section follows:
Phillips screwdriver
M13 wrench
M11 wrench
M6 hex key
REAR WHEELS & CASTERS
We recommend that you do not replace or adjust rear wheel or caster
components yourself, since special tools and training are required. Please
contact your Graham-Field dealer when your rear wheels or casters need
adjustment.