E&J TRAVELER 3F02-INS-LAB-REVB10 - Manual (Page 20)

20 3F02-INS-LAB-RevB10, March 2010 • Traveler L4 User Manual
WHEEL LOCKS
Adjust wheel locks
One M11 wrench
1. Use an M11 wrench to
loosen the adjustment
bolt until the wheel lock
slides on the frame.
2. Place the wheel lock in
the locked position and
slide it into contact with
the tire.
3. Place the wheel lock in
the unlocked position
and slide it 3/8" closer to
the tire.
4. Use an M11 wrench to tighten the adjustment bolt and engage the
wheel lock to check the fit. The wheel lock should indent the tire at
least 3/8".
5. Repeat steps 1-4 for other wheel lock. Tighten the adjustment bolts
securely to eliminate wheel lock movement on frame.
WARNING: Ensure that wheel locks are adjusted so that they
lock in place appropriately before occupying or operating
wheelchair.
right rear wheel
wheel lock
shown unlocked
right front frame
adjustment bolt
wheel lock