E&J TRAVELER 3F02-INS-LAB-REVB10 - Manual (Page 16)

16 3F02-INS-LAB-RevB10, March 2010 • Traveler L4 User Manual
footplate
hanger
adjustment
holes
locking
button
latch
footplate extension,
adjust length
Adjust footplate extension length
1. See picture at right.
Loosen latch to free
footplate extension
inside hanger.
2. Press down on the lock-
ing button and adjust
the footplate to the
desired length. Ensure
that the locking button
is completely extended
and securely fastened
in the adjustment hole.
3. Fasten latch to secure
footplate extension
inside hanger.
4. Repeat steps 1-3 for the
other footplate exten-
sion.
5. Ensure that both footplate extensions are securely fastened and
that minimum ground clearance is 2-1/2 inches.
WARNING: Ensure that footplates are securely fastened before
occupying or operating wheelchair.