Enterasys Networks 7S4280-19-SYS - Manual (Page 80)

The NAC Controller Initialization Procedure
6-12 Initializing the NAC Controller
Figure 6-15 Out-Of-Band Management Type Configuration Setup Confirmation
10. A screen displays the current configured date and time and asks you whether you would like
to update the date and time as displayed in Figure 6‐16 . If you select No, skip the following
two steps and proceed to Step 14 to configure the UTC/Local Time Hardware Clock setting. If
you select Yes, proceed to Step 11 .
Figure 6-16 Configure System Date and Time
11. A screen displays for setting the system date as displayed in Figure 6‐17 . Click on ^(‐) to select
a previous month or V(+) to select the next month. When the correct date is selected, click on
OK to proceed.