Enterasys Networks 7S4280-19-SYS - Manual (Page 81)

The NAC Controller Initialization Procedure
Enterasys NAC Controller Hardware Installation Guide 6-13
Figure 6-17 Set the System Date
12. A screen displays for setting the system time in an hour/minute/second format as displayed in
Figure 6‐18 . Click on the desired box to make any changes and click on OK to proceed.
Figure 6-18 Set the System Time
13. A screen displays for setting whether the hardware clock is set to the Coordinated Universal
Time (UTC/GMT) or to local time as displayed in Figure 6‐19 . Select your hardware clock
setting. Click on OK to proceed.