Cooling fans, Cooling fans -6, Connecting the 15-amp ac power cords -6 – Enterasys Networks 7S4280-19-SYS User Manual
Page 40: Figure 3‐3
Cooling Fans
3-6 Enterasys Matrix N1 Chassis Setup
Figure 3-3 Connecting the 15-Amp AC Power Cords
If you experience any problems with this installation, contact Enterasys Networks for assistance.
Cooling Fans
The Enterasys Matrix N1 Chassis is equipped at the factory with six (6) fixed cooling fans. These
fans are not removable. If a fan should fail, contact Enterasys Networks Technical Support for
assistance (refer “
1 NEMA 5-15P 15 A power cords (2)
Note: Power cords shown are for North America only.
Each outlet must be on a separate circuit.
2 AC power socket (2 each supply)
3 115 Vac, 15 A power outlet
CAUTION: THIS UNIT MAY HAVE MORE THAN ONE POWER SUPPLY CORD. DISCONNECT
TWO (2) POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.
VORSICHT: DIESES GERÄT HAT MEHR ALS EINEN NETZANSSCHLUß. TRENNEN SIE VOR
WARTUNGSARBEITEN DIE 2 NETZANSCHLÜSSE VOM NETZ, UM ELEKTRISCHE SCHLÄGE
ZU VERMEIDEN.
ADVERTENCIA: ESTA UNIDA PUEDE TENER MAS DE UN CABLE DE FUENTE DE PODER. DESCONECTAR
DOS CABLES DE FUENTES DE PODER ANTES DE DAR SERVICIO PARA PREVENIR RIESGO ELÉCTRICO.
AC INLET 1
100 - 125V ~ 3.6A
200 - 240V ~ 1.6A
50/60 Hz
AC INLET 2
100 - 125V ~ 3.6A
200 - 240V ~ 1.6A
50/60 Hz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECIEVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME A LA NORME
NMB-003 DU CANADA.
VCCI-A
7C111
N826
T3A167
1
2
3