Modifying the downstream default policy, Modifying the downstream default policy -21 – Enterasys Networks 7S4280-19-SYS User Manual

Page 89

Advertising
background image

The NAC Controller Policy Configuration

Enterasys NAC Controller Hardware Installation Guide 6-21

Modifying the Downstream Default Policy

Depending on the network configuration or circumstances, itʹs possible that traffic from the 
upstream side could be rerouted to the NAC Controller, where it would be authenticated using 
the upstream source IP address. To avoid this problem, add a Layer 3 IP Address Source rule to 
the downstream default policy configured on the NAC Controller, using the upstream IP subnets 
(or critical servers located in the upstream) and containing the traffic to a VLAN. 

Advertising
This manual is related to the following products: