Ericsson DT590 - Manual (Page 103)

103 BusinessPhone – Cordless DT590
Write Text
Write Text
When writing text messages and adding/editing or searching for
names in the Phonebook, the keys 0 to 9, *, or # can be used. The
first character entered will be an upper level character followed by
lower level characters unless the *-key is pressed before entering
the character. When pressing a key, the first available character on
that specific key is displayed. To get the following characters, press
the key repeatedly. Key 0 and 1 contain special characters. The
marked character is selected after a time-out (3 seconds) or when
another key is pressed. Pressing key 1 adds space between the
characters and pressing the *-key switches between upper and
lower case (not applicable in the System Phonebook). The first
character entered in a message, or when adding/editing a name in
the phonebook, will be an upper level character followed by lower
level characters unless the *-key is pressed before entering the
character.
Example (to write Smith): 7777
Press for S. 6
Press for m. 444
Press for i. 8
Press for t. 44
Press for h.
Control keys
While entering a name or a number, you can use the following keys
for control and navigation: º
Press the left navigation key to move to the left.
Note: Moves to the beginning of the text if held longer.