Ericsson DT590 - Manual (Page 36)

Outgoing Calls
BusinessPhone – Cordless DT590 36
Handsfree
While you are waiting for a connection, dial tone or during the call: ¼
Press to switch the call to handsfree speaking mode.
You are connected to the caller via the loudspeaker and
microphone.
To end calls Ъ Щ
Press to end the call.
The duration of the call is displayed.
Last External Number Redial
When you initiate an external call, the system automatically stores
all dialled digits, irrespective of whether the call was successful or
not. *** Ь Ы
Press to redial the last dialled external number.
The display will show the dialled number.
Redial number from Call list
The last 20 dialled, received, and missed numbers are stored in the
Call list. If a number occurs more than once, the last time stamp is
shown. You can dial one of these numbers by selecting the number
from the Call list. Ь Ы
Press.
The Call list appears. º
Scroll until you have the correct number or name. Ь Ы
Press to call the selected number.
Tip: If you press the C/Mute key instead of the Yes key, you
can remove the number from the list.