Rgb 460xi series • installation and operation – Extron electronic Wall and Floor Box Mountable Interfaces RGB 468 Mxi User Manual

Page 15

Advertising
background image

RGB 460xi Series • Installation and Operation

2-5

i

Composite video connector (RGB 464xi) — This female

RCA-to-BNC type connector provides pass-through capability

for composite video input.

j

S-video pass-through connector (RGB 464xi) — Connect an

S-video source to this 4-pin mini DIN pass-through connector.

kl

RCA audio connectors (RGB 464xi) — Connect the left audio

signal cable to the white RCA connector

(k L/Mono), and the right audio signal

cable to the red RCA connector (l R) for

unbalanced stereo audio pass-through

input. Wire the RCA plugs as shown on

the right.

N

When a mono audio signal is applied to the L/Mono
input, the same signal is output to both left and right
audio outputs.

m

Network connector (RGB 464xi) — Connect a computer to this

RJ-45 female connector for pass-through to a network.

n

Opening for architectural adapter plates — The RGB 468xi

accepts up to four optional standard architectural adapter plates

(AAPs) attached here (up to three on the RGB 468xi AKM UK).

The RGB 468 Mxi (not pictured) can accept up to four optional

mini architectural adapter plates (MAAPs) attached here. The

adapter plates come in a variety of audio/video connector

configurations.

#4-40 Nut w/ Captive

Washer

4-gang Wall Box

H. SHIFT

MIN/MAX

TM

RGB 468xi

INPUT

MONITOR

AUDIO

RGB 468

WITH ADSP

MONITOR

NO MONITOR

The RGB 468 Mxi (not
shown) mounts from
the front using hex screws.

The RGB 468xi (shown)
mounts from the
rear using nuts.

0

Tip (+)

Sleeve ( )

Sleeve ( )

Ring (-)

Tip (+)

Audio Plugs.eps

RCA Connector

3.5 mm Stereo Plug Connector

(balanced)

Sleeve ( )

Ring (R)

Tip (L)

3.5 mm Stereo Plug Connector

(unbalanced)

Advertising