EnGenius Technologies ENH500 - Manual (Page 31)

Wireless Mode
The wireless mode supports 802.11a/n mixed operation. It is
compatible with the most common wireless bands.
Channel HT Mode The default channel bandwidth is 40 MHz. A larger channel can
provide better transmit quality and speed.
Extension Channel Specify the upper channel or lower channel selection. It may
influence the Auto channel function.
Channel / Frequency The channel availability is determined by the country’s
regulations. The device operates in the 5GHz spectrum.
Auto Place a check mark to enable Auto channel selection.
AP Detection AP Detection can help to select a best channel by scanning the
nearby area.
Current Profile Configure up to four different SSIDs; it allows for the division of
clients into separate groups to access the network. Press Edit to
configure the profile and place a check to enable an additional
SSID.
Profile Isolation Restrict client communications with different VID by selecting the
Radio button.
Accept / Cancel Press Accept to confirm the changes or Cancel to return to the
previous settings.
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 4.1 for more information.