EnGenius Technologies ENH500 User Manual
Page 39
7.2 Wireless Security Settings
Wireless Security Settings section will guide you through the Security configurations: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend the use of WPA2-PSK as your security setting.
7.2.1 WEP
Security Mode
Select WEP from the drop down list.
Auth Type
Select Auth Type in Open System or Shared.
Input Type
Select Input Type in Hex or ASCII.
Key Length
Select Key Length in 64/128/152 bit password length.
Default Key
Select the default index key for wireless security.
Key1
Specify password for security key index No.1.
Key2
Specify password for security key index No.2.
Key3
Specify password for security key index No.3.
Key4
Specify password for security key index No.4.
The IEEE 802.11n standard does not include WEP/WPA-PSK/WPA-PSK TKIP
security mode. To comply with the standard, when you use the above encryptions, the
wireless transmit mode will drop from 802.11n to 802.11a.