Canon PIXMA PRO-200 Wireless Inkjet Photo Printer User Manual
Page 280
2.
Check message and select
OK
.
3.
Remove any paper in top feed and press
OK
button.
4.
Press
ON
button.
5.
Make sure
ON
lamp is turned off and wipe paper feed roller with damp cloth.
Wipe the paper feed roller (A) in the top feed with a moistened cloth or other materials. Do not touch
the paper feed roller with your fingers, wipe it as rotating the shaft (B) with your fingers.
Note
• If the shaft is not rotated, turn off the printer and turn it on again.
6.
After wiping with damp cloth, press
ON
button.
7.
Perform paper feed roller cleaning (
No wiping
) again.
Note
• If printing data is sent to the printer when performing the paper feed roller cleaning with
Wipe with
cloth
, the auto power on setting is disabled even if it is set to be automatically turned on.
In this case, set the printer to be automatically turned on again.
From the printer
280