Canon PIXMA PRO-200 Wireless Inkjet Photo Printer - Manual (Page 456)

Disable the paper source setting of the application software
Disables the paper feed method that is set by the application.
With some applications such as Microsoft Word, the data may be printed with a feed method that
differs from the printer driver setting. In this case, check this function.
Important
• When this function is enabled, normally the paper feeding method cannot be changed from the
Canon IJ Preview.
Ungroup Papers
Sets the display method of Media Type , Page Size , and Printer Paper Size .
To display the items separately, select the check box.
To display the items as a group, clear the check box.
Do not allow application software to compress print data
Compression of the application software print data is prohibited.
If the print result has missing image data or unintended colors, selecting this check box may improve
the condition.
Important
• Uncheck this check box under normal circumstances.
Print after creating print data by page
The print data is created in page units, and printing starts after the processing of one page of print
data is complete.
If a printed document contains unintended results such as streaks, selecting this check box may
improve the results.
Important
• Uncheck this check box under normal circumstances.
Cancel the safety margin regulation for paper size
Cancels the safety margin regulation when you set Media Type to Matte Photo Paper , Premium
Fine Art Rough , or Photo Paper Pro Premium Matte A on the Main tab.
When you check this item, the safety margin regulation is canceled, printing in a wider print area and
borderless full-page printing become possible, and printing can be performed for all paper sizes.
When the safety margin regulation is canceled, the paper may become smudged or the print quality
may drop depending on the paper size used and the environment.
If that happens, we recommend that you print on a paper size that has large margins.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select
On (Weak) or On (Strong) .
Off
The printer prints data without using this function.
On (Weak)
The printer uses this function to print data only when the data quality is acceptable.
On (Strong)
The printer always uses this function to print data.
456