HP MFP M528f Monochrome Laser Printer - Manual (Page 171)

Reset factory settings
Resetting the printer settings to the factory-set defaults can help resolve problems.
● Introduction
● Method one: Reset factory settings from the printer control panel
● Method two: Reset factory settings from the HP Embedded Web Server (network-connected printers only)
Introduction
Use one of the following methods to reset the printer settings to the original settings from the factory.
Method one: Reset factory settings from the printer control panel
Use the printer control panel to restore the settings to their original values.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
● General
● Reset Factory Settings
3. Select Reset .
A verification message advises that completing the reset function might result in loss of data.
4. Select Reset to complete the process.
NOTE: The printer restarts automatically after the reset operation completes.
Method two: Reset factory settings from the HP Embedded Web Server (network-
connected printers only)
Use the HP EWS to reset the printer settings to the original settings.
1. On the printer control panel, select the Information button, and then select the Network icon to
display the IP address or host name.
2. Open the General tab.
3. On the left side of the screen, click Reset Factory Settings.
4. Click the Reset button.
NOTE: The printer restarts automatically after the reset operation completes.
ENWW Reset factory settings 157