ESPRIT ET588 - Manual (Page 11)

ET488/ET588 10
STEP 5
•
This step is easier if you have someone else helping to hold the console while you
connect the wires. Connect the handlebar incline switch wire (55) on the left side to the
mating connector (38) of the console. Connect the handlebar speed switch wire (54) on
the right side to the mating connector (37) of the console and then connect the
computer cable (50) to the mating connector (48) of the console.
55
38
6
48
50
54
37
STEP 6
•
Secure the console with four 5/16 x 1/2 bolts (131). Do not pinch the wires when
sliding the console onto the upright tubes.
4
5
131
131
6