ESPRIT ET588 - Manual (Page 13)

ET488/ET588 12
Getting familiar with the control panel
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the safety key is
installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the
Time and Distance windows will display Odometer readings for a short time. The Time
window will show how many hours the treadmill has been in use and the Distance window will
show how many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has
gone. Then a message will scroll across the dot matrix display showing the current software
version. The treadmill will then enter idle mode, which is the starting point for operation.
Operation of Your Treadmill