Washing drum, Door seal, Drain pump – Electrolux L 56840 User Manual

Page 18

Advertising
background image

2. Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it

will go, so that it is firmly in place.

5. Clean all parts of the washing machine,

especially the nozzles in the top of the

washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in

the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap

water containing iron.
Do not clean the drum with acidic descaling agents, scouring agents containing chlorine

or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4

measuring cup of detergent.

Door seal

Check from time to time the door seal and elimi-

nate eventual possible objects that could be trap-

ped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

• the machine does not empty and/or spin

18

Care and cleaning

Advertising