Parts ordering, Parts list, Retrofit kits – Emerson Process Management 1051 User Manual

Page 28: Common parts (figures 12 and 13), Instruction manual, Warning

Advertising
background image

Instruction Manual

D100320X012

1051 and 1052 H & J Actuators

October 2012

28

5. Adjust the spring to obtain the appropriate travel stop restriction by following the procedures presented in the

introductory portion of this section, and then return the unit to operation.

Parts Ordering

When corresponding with your Emerson Process Management sales office about this equipment, refer to the serial

number found on the actuator nameplate (key 41, figure 12). Also, specify the complete 11-character part number

from the following parts list when ordering replacement parts.

WARNING

Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should

not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the

performance of the valve, and could cause personal injury and property damage.

Parts List

Retrofit Kits

Kit provides parts to add a top-mounted handwheel.

Kit number 1 includes the handwheel assembly only.

Kit number 2 includes Kit number 1 and a new upper

case (key 1) that is required to mount the handwheel

assembly.

Key

Description

Part Number

1052 Actuator

Kit Number 1

Size 40

38A1213X032

Size 60, Push-Down-to-Close

38A1213X062

Size 60, Push-Down-to-Open

38A1213X052

Kit Number 2

Size 40

38A1213X072

Size 60, Push-Down-to-Close

38A1213X022

Size 60, Push-Down-to-Open

38A1213X042

1052 Actuator

Kit Number 1

Size 40

38A1213X032

Size 60, Push-Down-to-Close

38A1213X062

Size 60, Push-Down-to-Open

38A1213X052

Size 70

CV8010X0012

Kit Number 2

Size 40

38A1213X072

Size 60, Push-Down-to-Close

38A1213X022

Size 60, Push-Down-to-Open

38A1213X042

Size 70

CV8010X0022

Common Parts

(figures 12 and 13)

Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.

Note
The size 70 actuator is available only in 1052 actuators.

Key

Description

Part Number

1

Casing, upper

2

Diaphragm Casing, Lower

3*

Diaphragm

Molded Nitrile/Nylon

Std, w/handwheel, or w/adj up stop

Size 40

2E670002202

Size 60

2E859702202

Size 70

2N126902202

w/adj down stop

Size 40

2E669902202

Size 60

2E859802202

Size 70

2N130902202

Molded Silicone/Polyester

Std, w/handwheel, or w/up stop

Size 40

2E6700X0012

Size 60

2E8597X0032

Size 70

2N1269X0012

w/down stop

Size 40

2E6699X0042

Size 60

2E8598X0012

Size 70

2N1309X0012

4

Diaphragm Head

*Recommended spare parts

Advertising
This manual is related to the following products: