Hawke Sport Optics 4.5-14x44 Sidewinder 30 SF Riflescope (10x Half Mil Illuminated Reticle) - Manual (Page 4)

4
3. Before tightening the rings, look through the riflescope in your normal shooting position.
Adjust the riflescope (forward or backward) until you find the furthest point forward (to
ensure maximum eye relief) that allows you to see a full field of view.
4. Rotate the riflescope in the rings until the reticle pattern is upright and the elevation
turret is on top.
5. Tighten the base screws evenly, securing the mounts to the rifle base and tighten the ring top
screws evenly on each side.
Warning: Avoid over tightening the rings. This can damage the riflescope affecting performance
or rendering it inoperable. 16 in/lbs (1.33 ft/lbs, or 1.8 Nm) for ring top screws and 30 in/lbs
(2.5 ft/ lbs, or 3.4 Nm) for ring base screws.