Hawke Sport Optics 4.5-14x44 Sidewinder 30 SF Riflescope (10x Half Mil Illuminated Reticle) - Manual (Page 8)

8
magnification, then proceed to check the printed markings against known target distances. If
required be prepared to re-mark the adjuster to your own personal settings.
ATTACHING THE SIDE WHEEL
1. Using a 2mm Allen wrench, unscrew the 3 bolts on the side wheel and remove the small plate
they hold in place.
2. Slide the wheel completely past the brightness control and onto the parallax control, aligning
the distance markings.
3. Align the small plate with the 3 Allen bolt holes on the side wheel and slide it past the
brightness control. The small plate will only locate onto the parallax control when in line
with the knurling.
4. Install the 3 bolts.