Hawke Sport Optics 4.5-14x44 Sidewinder 30 SF Riflescope (10x Half Mil Illuminated Reticle) - Manual (Page 9)

9
TURRET ADJUSTMENT
1. Before adjusting the turrets, you must first unlock them; this is achieved by pulling them
outwards. They will now click when rotated.
2. The turrets can then be adjusted until the point of aim matches the point of impact. To lock
the turrets, simply push them back down.
3. When a satisfactory zero is achieved, the turrets can be reset. To do this, remove the screw
on the top of the turret with the turret in the down and locked position. The turret cover
can then be removed and rotated to the “0” position. Re-install the screw. The riflescope
is now “zeroed”.
Note: The elevation turret has an internal dial that can be seen through the glass window. This
shows which revolution the turret is adjusted to.